95 ford f250 4wd front wheels lean in when in reverse?

Question

tires straight when going forward is this normal or do i need new springs

Answer 1

The reason that they lean inward at the top is the alignment of the tires and the design of the front suspension. Your front end is the TTB (Twin Traction Beam). It is an independent suspension that uses only one beam with a radius arm to prevent for/aft movement. It is a very capable offroad suspension in terms of high-speed travel cycling.

Anyway, back to your truck. As the suspension compresses, the tire tops lean inward, and as the suspension droops the tires lean outwards; characteristics of the suspension type.

Good alignments, have the front of the tire slightly inward. So each tire is pointed toward each other a tiny bit. As you back up, the tires want to spread apart from each other, and by laws of physics and geometry your suspension compresses slightly. As you drive forward, the suspension settles and looks normal.

You do not need new springs, your alignment is most likely fine, but poor alignment or worn steering components can amplify the 'leaning in' when backing up.

Answer 2

most every car and truck tire lean when they back up and turn... more important quetion is how does it drive and have you had the front end check in the last month or so.. has nothing to do with springs

Answer 3

they are made that way. as soon as you get moving straight they are suppose to straighten out.

Answer 4

It is very normal. You have a 4 WD most of the older ones do this. Don't sweet it. Now get in the mud and have some fun!!!!!