After changing the battery on my keyless entry, how do I reset it for a chevy suburban?

Question

After changing the battery on my keyless entry, how do I reset it for a chevy suburban?

Answer 1

Press the Lock and Unlock Buttons simultaneously for 7 seconds the horn should sound to show that it is synced... give it a shot, let me know how it goes, I'll look for other methods.

you could also try this:

Turn the ignition to ON.

Turn the radio to OFF.

Press the RESET button in order to clear any IPC warning messages.

Press and release the OPTIONS button on the DIC to scroll through the display options until the IPC display is blank.

Press and hold the RESET button for 3 seconds.

Press the OPTIONS button until FOB TRAINING message is displayed.

Press the RESET button in order to begin the programming sequence. The message HOLD LK + UNLK 1ST FOB will be displayed.

Simultaneously press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The IPC will indicate when that transmitter is programmed and when to proceed to the next. Repeat this procedure for each additional transmitter or press the OPTIONS button to exit.

Answer 2

you can try this website www.programyourremote.com

Answer 3

on 1 of the 2 halfs of the remote when you took it apart it will show the directions how to reprogram...   hold the lock and unlock buttons at same time for 7 seconds pointed at the car and it will reconnect