Any way to get free energy? Solar board + place to store energy.?

3 ANSWERS

1. 
   

   You need a bank of batteries that will need a combination of solar power and wind power. Then you will need a rectifier and an inverter because batteries are DC and we use AC in our homes. The whole setup will cost you big bucks and the batteries will last either 5,10 or 20 years depending on the type. So the batteries will need replacing and your system will need maintenance to check all is ok. Can be done cheaply but you will need technical help.

   Report (0) (0)  |   earlier  

2. 
   

   There are many good reasons to conserve energy. If we use less gas, oil and electricity we will save money, and the pollution associated with extracting and using fossil fuels will decrease. Reducing greenhouse gas production may help to reverse global warming. In a nutshell - conservation of energy has both personal and societal benefits.
   
   Most people are concerned with making their money last longer and energy conservation can help by reducing our energy costs. Homeowners can do many things to cut down on their energy needs. Perhaps the best thing they can do to is to install better insulation to retain warm and cool air.
   
   Heating and air conditioning are the biggest energy consumers of the average household. Much of the heat and cool air escapes because of poorly insulated roofs, walls, doors, and windows. In fact in a lot of cases heating and cooling is responsible for around 50% of your energy costs. Improving insulation will result in greater conservation of energy and lesser energy costs. Small changes in this area can result in dramatic reduction in your monthly payment to your utility company.
   
   Old cooling and heating appliances should be replaced with newer models which are more energy efficient. Other large appliances like refrigerators can also be replaced with newer models that are designed to conserve energy. Always make sure you read the energy label, if you do, you will often find that a cheap product in fact can be expensive in its every day use because of its energy consumption.
   
   Traditional light bulbs are inefficient because much of the energy they consume is converted to heat. Replacing all your incandescent bulbs with compact florescent bulbs will provide the same level at light with less energy consumption. Even though the cost of these bulbs is greater than traditional bulbs, they last up to 20 times longer, resulting in significant overall savings.
   
   Using alternative energy sources such as solar panels or wind turbines can greatly reduce the amount of energy needed from traditional sources. The electricity produced by these devices can be fed back into the local power grid if it is not immediately used by the household. This reduces the power bill even further (the power meter runs backwards) while supplying clean power to your community.
   
   Conservation of energy is not just for homes, cars and trucks are available with more energy efficient engines and some can run on alternate power sources such as hydrogen or electricity.
   
   Conservation of energy is something that everyone can contribute to. By being careful in how we use our resources we are building a society for our children and grandchildren.

   Report (0) (0)  |   earlier  

3. 
   

   Let me start off by saying we (my family and I) live completely, 100% “off of the grid and are completely self sufficient”
   
   The house is built utilizing natures natural elements, in the shape of an octagon with 8ft wide arch doors on every wall to catch every angle of wind (typical 4 sided homes have half the chance as one with 8 sides. A circle being the most efficient design). Woodburning stoves, solar chimney, solar AC, solar heating, solar water heating (pool and home), solar stove, solar power, wind power, hydrogen powered back up generator, hydrogen back up water heater, hydrogen stove, 2 hydrogen powered trucks, 1 EV (electric vehicle) and satellite internet.
   
   There are no utility lines, no water lines, no roads, tv, cell service, etc. on our ranch. EVERYTHING needed is produced here. All electricity comes from 27 solar panels, 2 main wind gens and a back hydrogen generator if needed (typically we can last 9 days with all luxuries of sunless windless weather, hasn't happened yet). Water is caught and storaged from the rain. Hot water is made with solar batch water heaters with an on-demand hydrogen hot water heater as backup. Even our vehicles use alternative energy (2 hydrogen trucks, 1 EV electric vehicle converted). Because of this we have no bills, no debt and no mortgage.
   
   The fallowing steps were taking directly out of a DIY guide I offer to those who would like to run their homes on solar power safely, reducing their monthly utility bills or even selling power back the the electrical companies. The entire guide is available at www agua-luna com. Its pretty simple but if you have any problems feel free to contact me directly I can walk you threw the process.
   
   Materials you will need
   
   A sheet of copper flashing from the hardware store. This normally costs about $5.00 per square foot. We will need about half a square foot.
   
   Two alligator clip leads.
   
   A sensitive micro-ammeter that can read currents between 10 and 50 microamperes. Radio Shack sells small LCD multimeters that will do, but I used a small surplus meter with a needle.
   
   An electric stove. My kitchen stove is gas, so I bought a small one-burner electric hotplate for about $25. The little 700 watt burners probably won't work -- mine is 1100 watts, so the burner gets red hot.
   
   A large clear plastic bottle off of which you can cut the top. I used a 2 liter spring water bottle. A large mouth glass jar will also work.
   
   Table salt. We will want a couple tablespoons of salt.
   
   Tap water.
   
   Sand paper or a wire brush on an electric drill.
   
   Sheet metal shears for cutting the copper sheet.
   
   The first step is to cut a piece of the copper sheeting that is about the size of the burner on the stove. Wash your hands so they don't have any grease or oil on them. Then wash the copper sheet with soap or cleanser to get any oil or grease off of it. Use the sandpaper or wire brush to thoroughly clean the copper sheeting, so that any sulphide or other light corrosion is removed.
   
   Next, place the cleaned and dried copper sheet on the burner and turn the burner to its highest setting.
   
   As the copper starts to heat up, you will see beautiful oxidation patterns begin to form. Oranges, purples, and reds will cover the copper.
   
   As the copper gets hotter, the colors are replaced with a black coating of cupric oxide. This is not the oxide we want, but it will flake off later, showing the reds, oranges, pinks, and purples of the cuprous oxide layer underneath.
   
   The last bits of color disappear as the burner starts to glow red.
   
   When the burner is glowing red-hot, the sheet of copper will be coated with a black cupric oxide coat. Let it cook for a half an hour, so the black coating will be thick. This is important, since a thick coating will flake off nicely, while a thin coat will stay stuck to the copper.
   
   After the half hour of cooking, turn off the burner. Leave the hot copper on the burner to cool slowly. If you cool it too quickly, the black oxide will stay stuck to the copper.
   
   As the copper cools, it shrinks. The black cupric oxide also shrinks. But they shrink at different rates, which makes the black cupric oxide flake off.
   
   The little black flakes pop off the copper with enough force to make them fly a few inches. This means a little more cleaning effort around the stove, but it is fun to watch.
   
   When the copper has cooled to room temperature (this takes about 20 minutes), most of the black oxide will be gone. A light scrubbing with your hands under running water will remove most of the small bits. Resist the temptation to remove all of the black spots by hard scrubbing or by flexing the soft copper. This might damage the delicate red cuprous oxide layer we need to make to solar cell work.
   
   Cut another sheet of copper about the same size as the first one. Bend both pieces gently, so they will fit into the plastic bottle or jar without touching one another. The cuprous oxide coating that was facing up on the burner is usually the best side to face outwards in the jar, because it has the smoothest, cleanest surface.
   
   Attach the two alligator clip leads, one to the new copper plate, and one to the cuprous oxide coated plate. Connect the lead from the clean copper plate to the positive terminal of the meter. Connect the lead from the cuprous oxide plate to the negative terminal of the meter.
   
   Now mix a couple tablespoons of salt into some hot tap water. Stir the saltwater until all the salt is dissolved. Then carefully pour the saltwater into the jar, being careful not to get the clip leads wet. The saltwater should not completely cover the plates -- you should leave about an inch of plate above the water, so you can move the solar cell around without getting the clip leads wet.
   
   now place in the sun with the magnefied on top.
   
   The solar cell is a battery, even in the dark, and will usually show a few microamps of current.
   
   That’s it it’s that simple. If you’d a more detailed process and some pics (ouldn’t put them here) it’s available along with some other DIY alternative energy projects at  www agua-luna com
   
   Hope this helped, feel free to contact me personally if you have any questions if you’d like assistance in making your first self sufficient steps, I’m willing to walk you step by step threw the process. I’ve written several how-to DIY guides available at  www agua-luna com on the subject. I also offer online and on-site workshops, seminars and internships to help others help the environment.
   
   Dan Martin
   
   Alterative Energy / Sustainable Consultant, Living 100% on Alternative & Author of How One Simple Yet Incredibly Powerful Resource Is Transforming The Lives of Regular People From All Over The World... Instantly Elevating Their Income & Lowering Their Debt, While Saving The Environment by Using FREE ENERGY... All With Just One Click of A Mouse...For more info Visit:  
   
   www AGUA-LUNA com
   
   Stop Global Warming!!!

   Report (0) (0)  |   earlier