Anyone use Aosept, or aosept equivalents contact lens solutions?

Question

I actually do not know what I am using right now. In about 2000 I started having awful problems with the Saline Solutions. I would put the lens in and my vision would go cloudy, it would clear up in abou 4 hours but when I took the lens out at night it was like I had poured acid in my eye. I called an ambulance once the pain was so bad.

I switched to aospet, but then it dissapeared, and now I am using "Clear Care" ?????

It's another peroxide disk system but within 10 days after I get the bottle and the disk it starts to burn like h**l when I put the lens in in the morning. I leave the disk in the solution all the time because I always have a lens soaking in it. I rotate the lenses.

Answer 1

try rinsing the lens off with regular Optifree or Aquify or Complete multipurpose saline solution after it has gone through the clear care system.  Just in case there is still active H2O2 on the lens.  It shouldn't cause the same effects as when you were storing your lenses in the saline over night, because you would just be using it as a rinse rather than a disinfectant.  This is what I do when I use clear care with my lenses.  I hope this helps!

Answer 2

I would try just using one pair of contacts. Not letting the disk air out could be causing some bacteria build up, which then gets on the contacts. If you do that and still experience burning, I would go to the eye doctor!