Besides "Craftsman",does anyone know who mfg's 19/32 sockets,1/2' drive?I need the individual socket.?

Question

I need this size particularly for homemade tools I use on bicycle repair

Answer 1

Here are a few:

http://www.drillspot.com/products/77135/...

http://www.quinntoolsonline.com/servlet/...

http://buy1.snapon.com/catalog/item.asp?...

6 point socket:

http://www.bennys.bz/index.php?_a=viewPr...

Answer 2

mac tool proto tools husky tools power built tools snapon tools

Answer 3

why not go with craftsman. all thier tools come with a lifetime garrantee plus you usually dont have to ever replace them. I found a s***w driver and a hammer on the side of the road. both were unoperational.  I took them to my local sears and they replaced them both no questions asked

Answer 4

hi

try a auto part supplier

if not try to used a metric size close to 19/32

Answer 5

19/32 in. is a size I cannot remember ever coming across although I did own one (socket), clean and unused. Are you sure it isn't a 9/16 in. nut (or bolt head) which has been stretched by an over sized spanner or socket?

The only other thing I can think of is a 16mm. socket, which again is an unusual size.

Just as a matter of interest, don't you think that a 1/2in. drive is rather heavy for bicycle repair? I would have thought that 3/8in. drive was more than adequate for that sort of work