Best plans to build skateboarding mini ramp?

Question

Thankyou

Answer 1

look up how to build a quarter pipe on youtube and get creative.

Answer 2

4 feet mini ramp

This is the smallest ramp you should can do cool tricks on. don't build smaller things, and if you also want to do air tricks, than better go with the 5 or 6 feet. a good reason to build this one is because you have to place it indoor. if you really need, you can make it 8 or 12 feet wide, but as for every ramp, try to go with atleast 16 feet wide. the ramp is build in 8 feet modules.

SHOPPING LIST

1 plate from 122 x 244 cm (4 by 8 feet) and 18mm (3/4 inch)

2 plates from 122 x 244 cm (4 by 8 feet) and 9 mm (3/8 inch)

about 15 studs from 5 x 10 cm (2 by 4's) and 240 cm (8 feet) long

good wood screws (lots)

1 template plate

CAN WE BUILD IT? YES WE CAN!

Start by drawing all the lines like on the plan, and also draw the curve (see template on how to) on the template.

saw the template

draw the template on the 18mm plate, and cut out the transitions.

add the 112cm stud on the end of the transition.

add a 191 cm stud on the down part of the transition.

the first 3 studs are 10 cm shorther than the others. they are placed on the 191 long one, for the last you will have to use a bit of felt over 2 by 4 to make it fit better to the transition.

add the other studs about every 20 to 25 cm.

add the first layer, start at the same level as the first 2 by 4. and leave a bit after the top of the ramp.

thats about it. add the coping, deck , your choise of top layer and flat bottom and your ready to ride your ramp.

yeah, nice going.

THE PLANS