Question:

Big bore kit cost?

by  |  earlier

0 LIKES UnLike

I was wondering how much it would cost to have a 95" stoker big bore kit installed on a 2003 fatboy?

 Tags:

   Report

5 ANSWERS


  1. $600 +60 an hour

    Rough guess for the top end

    If you want a stroker engine built That would be diffrent


  2. If you are going to install a big bore kit, go with ported heads and a cam also. You will also have to have some type of tuner installed. IMO just installing bigger pistons will not give you much more HP. See the site link AMS will also rent the special tools you need to do the work your self. And save big $$$ on labor. It is not that difficult to do the work. Harley's are simple to work on if you have the right tools.

  3. yea around 600 an most shops charge around 60 to 90 an hour on labour

  4. You can bore a 88" all the way out to 97" without stoking the crank, you can get kits here. you can install this kit yourself, Harley engines are not that hard to work on.

    http://www.revperf.com/TwinCam/twinPerfo...

    http://www.nrhsperformance.com/ekittc.sh...

  5. The 95" kit isn't a stroker just bigger bore.If you want to save some money and get a higher quality, find a machinist with torque plates and have him bore your own cylinders out.Then buy a good set of pistons.Your stock cylinders bored out are better than the ones you'll get from HD.Spend the money you save on adjustable push rods.
You're reading: Big bore kit cost?

Question Stats

Latest activity: earlier.
This question has 5 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.
Unanswered Questions