Bindings on skis?

Question

i got used skis and i believe the person who owned drilled to put his binding on. now i have to get a new binding for the skis and i m sure me n him has different feet size so i have to drill too for my binding. but it wont matter right? if the skiis were already drilld before?

Answer 1

the ski shop will just drip p-tex into the previous holes(fill the hole completely and use metal scraper to level off) and drill new ones..it's not perfect but it's the only reasonable solution to the problem of multiple mountings

Answer 2

You sould deffinately get the bindings remounted at a ski shop by a professional.  They can fill in the old holes and drill new ones.

Answer 3

I see you have asked this at least once before. Don't be dumb. If you don't have a clue, have a professional do it. Trust me, drilling holes in skis to mount bindings is a heck of a lot more complicated than drilling a hole in a wall to hang a picture.

Don't try it yourself if you don't have the mounting plates. They won't be centered.

If course, you could go ahead and do it...but if you ruin your ski, don't blame us!!

You can typically drill for two or three sets of bindings. After that, the core is too weakened.

And yeah, make sure the old holes are sealed, else water gets in there and rots the core.

Answer 4

no it wont matter as long as there is 5 mm os ski between the 2 holes.

thats what you need to hold the bindings.

also , plug old holes

Answer 5

you can go to a local ski shop and get them done that wold probably be better