Burn water as fuel?

Question

Is this BS?

http://water4gas.com/2books.htm

Answer 1

It's BS big time, all they want to do is sell you plans or a device that they claim will increase your fuel mileage. They do this by breaking water into Brown’s Gas, or Brown gas, or HHO or two parts hydrogen and one part oxygen.

They claim how easy it is, how simple it is. You of course ask the obvious question, if it’s so easy why don’t the car companies put them in their car right now? You’ll get one of several answers. 1. The auto companies sold out to big oil. 2. The government won’t let them because they are in the pocket of big oil, or 3. They want to keep you dependent on oil so they can control you.

If you ask for independent research data you get something like this, we have thousands of testimonials from people who say it works, or they’ll tell you NASA uses this same process, or every time it’s sent out they (big oil, the government, etc) sabotage the experiment to show it won’t work. Just so you know many companies use Brown’s gas generators, mainly for brazing. If a company has water and cheap electricity it may be more cost efficient to use brown’s gas them buy compressed gas.

More information on brown’s gas.

http://www.phact.org/e/bgas.htm

But lets say you decide to give it a try, heck, $5.00 plans and $60 in parts what you do have to lose really. Now you hook this thing up and one of two things happen.

1. Surprise nothing really happens, you go over the plans, and you think everything is set up right, you give the place a call, and if they are still in business, they’ll tell you that you have something set wrong and you need to tinker with a little, make sure part A is precisely 1.115 mm away from part B because if it’s not your output won’t be right, or you could buy one for X.

2. You see a slight increase in fuel mileage, surprised, I wouldn’t be. Back in the 1970’s when there were many, many devices to increase fuel mileage, including magnets, pre-heating, hydrogen generators and they all failed when tested in the lab. But many, many people claimed to see an increase in fuel mileage. So they did a little test, they took a box with hoses and wires going into it and out of it, the box did NOTHING. The took a person’s car “hooked up” the box hiding the wires and hoses where you couldn’t see the ends. The show the person the box and simply told them box would increase their fuel mileage. Can you guess what happened? Yep the people did see an increase, not because of the box but because they changed their driving styles. In a month or two the person fuel mileage was back down to where it started. They no longer paid any attention to their driving or fuel mileage for that matter, because the box was working and they knew it.

It’s a great con, if it doesn’t work it’s because you did something wrong, and if like a lot of people you watch your driving while you test the device, you see a slight increase in fuel mileage and are happy.

Oh that aluminum and lye think will make hydrogen, but if you do decide to do this make SURE the head, pistons, block, etc are NOT aluminum, you’re going to get a mix of water and lye into the heads, and block, and this stuff eat aluminum, you’ll get your fuel, but a rebuild engine will cost you big buck.

Answer 2

19G30

let me start off by saying Hydrogen is a great option for the concept of free energy.     I built my first hydrogen cell about 5 years ago. Have converted over 50 vehicles in the last 10 years (gydrogen and EV) and now currently run 2 trucks (and another EV), my home hot water heater, home stove and home generator on hydrogen for free with caught rain water and the help of a $10 solar panel.  I offer a step by step DIY guide to walk anyone interested threw the process. You can find it at www agua-luna com or you can email me.

i took a look at your site, the information looks like it would work, but without seeing the actual plans i couldn't say for sure. so it looks good, but VERY VERY expensive. i offer the same stuff in my site www agua-luna com for $5

There are basically 3 safe ways to make and use it... chemically, electrically and molecularly, the first 2 being easier so I'll only discuss them here. The fallowing steps were taking directly out of a DIY guide I offer to those who would like to run their vehicles or home on hydrogen safely. The entire guide is available at www agua-luna com

    On demand h2 generators are a bit different from the Hollywood versions like seen Chain Reaction with Keanu Reeves, that tend to explode violently every time a film is being made. However when used in an on-demand system there is no storage of hydrogen and oxygen in its gas form, only liquid (water) and is only transformed into gas “on-demand” in small cylinder size amounts. It’s actually safer then gasoline as it doesn’t evaporate, creating explosive fumes in the tank like gas. the following were actually taken out of my $5 guide available at www agua-luna com

    Chemically

    1. You’ll need a 6inch x 1ft schedule 40 pvc pipe. With pvc cement glue a cap on the bottom and use a s***w on cap for the top. Drill a small hole (1/4inch or so) in the side close to the top, s******g in a small copper shut off valve. Place a few feet of stranded (food grade is good) flex hose to the valve and into the air intake of your engine (carburetor or fuel injections).

    2. Now crunch up a couple aluminum cans (beer cans, soda cans etc) and drop them into the pvc pipe, along with a couple cups of lye (Red Devil drain opener has lye in it, some Clorox and Drano’s do to).

    3. Then simply add water, s***w on the top and wait a few minutes.

    What happens in simplicity is that aluminum and lye don’t really get along so they battle, and as always the innocent civilians (water H2O) that the most casualties, by giving up its hydrogen and oxygen. This then builds up in the void of the pipe and is ready to be vented into your engine, by opening the valve. You may need to start your engine on gas then switch it off after the hydrogen starts burning.

    Electrical is a bit easier then Chemically.

    1. Simply take a small solar panel 1.5 amps is what I use ($9 at harborfreight.com), connect the 2 wires from the panel +- to 2 conductors (carbon cores of batteries work well, just be careful removing it from the jacket), but any conductive material will work ie. Copper, aluminum, steel, etc.

    2. Drop the wires into a water tank (I use 55gal drums), make sure they don’t touch each other.

    3. Drill a small hole (1/4inch or so) in the side close to the top, s******g in a small copper shut off valve. Place a few feet of stranded (food grade is good) flex hose to the valve and into the air intake of your engine (carburetor or fuel injections).

    4. Then simply add water, s***w on the top cap and wait.

    After a few hours tiny bubbles will form and rise off one conductor (that’s hydrogen) and even smaller bubbles that just looks like foam will rise off the other (oxygen). I don’t remember which likes the positive and which likes the neg hydrogen or the oxygen.

    The third method is more complicated and is what I use for my vehicles. It’s just a modified Joe’s Cell, there’s a step by step DIY guide available to walk you threw the process here www agua-luna com

It also covers the other 2 methods described in more detail.

www agua-luna com

Hope this helped, feel free to contact me personally if you have any questions if you’d like assistance in making your first self sufficient steps, I’m willing to walk you step by step threw the process. I’ve written several how-to DIY guides available at  www agua-luna com on the subject. I also offer online and on-site workshops, seminars and internships to help others help the environment.

Dan Martin

Alterative Energy / Sustainable Consultant, Living 100% on Alternative & Author of How One Simple Yet Incredibly Powerful Resource Is Transforming The Lives of Regular People From All Over The World... Instantly Elevating Their Income & Lowering Their Debt, While Saving The Environment by Using FREE ENERGY... All With Just One Click of A Mouse...For more info Visit:  

www AGUA-LUNA com

Stop Global Warming, Receive a FREE Solar Panels Now!!!

Answer 3

Better to burn dead people as fuel.

Answer 4

water injection has been around since the 1930s,,more recently in the 60s and 70s by auto racers...what it does is allow higher compression and advance timing using lower octane fuel...unless you are going to rebuild your engine with hi com. pistons and hack the computer to advance timing..its a good money maker for the crook selling it.

Answer 5

No. Hydrogen fuel sales are being worked on now.

Answer 6

You can't burn water, I believe what they are doing is splitting it via electrolysis, which could be used for hydrogen combustion, but would not really solve any problems.

Answer 7

You can not burn water but you can create steam to power engines and use it as hydro-electricity, which forces water through a turbine a high speeds in order to turn the fans to create energy.

Check google for more info.

Answer 8

Water doesn't burn unless they can split the hydrogen and oxygen atoms and then burn them...