CAN SOME ONE HELP W/PROGRAMMING AN UNIVERSAL JUMBO REMOTE CONTROL, MADE BY JOURNEY'S EDGE #JRG-124500 ?

Question

I can usually program most anything but not this one! i want to use it on Emerson EWD 2203>a vcr/dvd combo. I broke the original remote and cannot figure out how to program this one. I'd really love to have the codes to the unit, if possible.As far as the remote i need very detailed instructions to program it. Thankx for any and all help.

Answer 1

Try the using the Jumbo code search.

1. Turn on the device that you want to set.

2. Aim the remote control at the device and press and hold down the CODE SEARCH button for at least 3 seconds until the red LED lights up solid red.

3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the LED light will blink once and then remain solid red.

4. Press ON/OFF button on remote slowly and repeatedly until the device you are trying to program shuts off. (Note LED will blink once each time you press ON/OFF button)

5. Once this occurs, press ENTER button to store the code and the LED light will turn off.