Question:

Can anyone help,i have jumbo sized universal tv remote but for the life of me i cannot program my satelite?

by  |  earlier

0 LIKES UnLike

Directv to it i have coded my tv but i have done exactly like it said and still cannot do it. Does anyone have any idea what i am doing wrong? please help thank you

 Tags:

   Report

1 ANSWERS


  1. JUMBO Remote Codes for Directv. 200,201,202,203,204, 205, 206, 207, 208,209,210,211,212,213 214 215 216 217

    1. Turn on the device that you want to set.

    2. Aim the remote control at the device and press down and hold CODE SEARCH button for at least 3 seconds until the red LED lights up solid red.

    3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the LED light will blink once and then remain solid red.

    4. Using the number keys, enter a 3-digit code . You will notice that each number that you press, the LED will blink once. After you have entered the 3rd digit, the red LED will turn off indicating that the code was recognized for the device.

    (NOTE: If the code entered was not compatible, the red LED will flash several times. You will then need to repeat Step 3. You have 30 seconds to enter a code.)

    5. After the red LED light has turned off. Press the ON/OFF key. If the device you are trying to program powers off, then you have found the correct code. If the device does not power off, then you will need to repeat the process again from Step 2, using another 3-digit code.

    You could try the Code Search hope it works for you.

    1. Turn on the device that you want to set.

    2. Aim the remote control at the device and press and hold down the CODE SEARCH button for at least 3 seconds until the red LED lights up solid red.

    3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the LED light will blink once and then remain solid red.

    4. Press ON/OFF button on remote slowly and repeatedly until the device you are trying to program shuts off. (Note LED will blink once each time you press ON/OFF button)

    5. Once this occurs, press ENTER button to store the code and the LED light will turn off.

Question Stats

Latest activity: earlier.
This question has 1 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.