Can i run 2 subs off of a mono amp?

Question

I have 2 "4 ohm" kicker solo baric L5 10's. Its reccomend that i have 450 rms per sub. If the amp does work would I be running it off 2 ohms or 4 ohms? Would this amp work?

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=19352

Answer 1

i have the olde rmodel of this amp 9103D. And its amazing. Same watts and everything except diff design. Anyways. This amp particularly has 2 positives and 2 negative connections even though its a mono amp. So you can either hook each sub up +,- +,- or you could connect the positives and minuses together and it'll be wired at 2 ohms. I can't really explain it. But the 2 ohms would give you 900W so that's perfect. 450 to each sub

Answer 2

Yes... Connect the positives and negatives of the subs together then connect that to the positive and negative of the amp

Answer 3

If you hook the 2 subwoofers up in parallel the impedance is 2 ohms, and the amplifier can handle a 2 ohm load up to 900 watts, which is 450 per.

Yes, the amp can handle the 2 sub-woofers, just hook them up in parallel - amp terminal 1 is connected to 1 wire of both speakers, amp terminal 2 is connected to the 2nd wire of both terminals.