Continuing from "how to connect big hifi speaker"?

Question

ok i have connected my computer to the amp with a 3.5 mm jack to rca the bars on the amp go up and down when i play music my speakers are connected to the amp but no sound comes out the speakers are BGM speakers i they are american or sutim anyway the speaker specs is "Rated power 80w, max power 200w , impedance 4-8 ohms" the amp is a "osaki digital surround karaoke tuner amplifier dpp 1881" i have connected to 4-8 ohms slot with 16awg wire need some help why no sound is coming out

thanks in advance

Answer 1

1. Is Amplifier set to the right input, .eg "tape 2"

2. Most amps have a k**b or buttons to control the speaker(s). It will read, A, B, off- make sure it's set right for how you've wired them.

3. Sure the speaker's fuse(s) aren't blown?

4. Are you sure the amplifier is fully working? If certain parts of the preampor output amp fail, inputs can stop working or you may lose power to one or more speaker out.

5. Your speakers are actually quite cheap. Peak watt ratings are never good to see, and a 250% gulf betwen figures is plain deception. Don't expect much, for it's probably the worst in FOB Japan hifi stuff, and some WAS pretty bad.