Could i have the shafts taken off my mizuno mx 17s and put onto nike blades?

Question

the shafts on the mx17s are s300

Answer 1

Yeah, but why?  Besides, the Mizuno MX-17 is not in the same category of the Nike Blades.  Hopefully your game has improved that much to use irons for strictly a low handicap player(0-5).  STRICTLY!!

Answer 2

This is possible, however they may not work as good as they do in your irons at the moment, as no make of head is the same profile or weight, so what i mean is, that shaft may work in the mizuno's but you could put them into the nike's and hit them totally different. For instance i went to a fitting centre and tried a callaway iron and a mizuno one, i got measured up and one club i needed project x shafts in the other dynamic golds, both are available, but simply one worked with one head and make and the other worked better in the other. You are better off trying these nike blades and getting the standard stiff (if you use stiff) and see how you hit them. Or go and get fitted up for the nike's, there maybe a shaft out there that could be more accurate or longer, you just don't know.

Hope this helps, Good Luck!

Answer 3

Yes, but if the bore depth of the two heads is different, the same shaft could play as a slightly different length in the new iron. And, the bore size has to be the same. The shafts you want are about $9 each brand new. You might as well trade in your old set or just buy the new shafts outright.

Answer 4

yes they both have tapered tips  . but you may have to measure , because the nikes may be longer shafts . but then you will have a set of mizuno urons with nike shaft bands . i have the shafts you need . as well as set of the original blades which tiger plats . made by a company in canada called accuform , which nike purchased . the head of r and d brought out a square headed driver called the whistler in 1993 . he is with nike and is wat more advanced on square feads than other company .