Deaf or Hard of hearing? please help?

Question

INSTRUCTION: Using VP-200 with SR-200 (Router) with cable modem.

--------------------------------------...

STEP ONE: (MODEM)

-Power Down Your Modem

1. Unplug the modem’s power cord and leave it off for now.

STEP TWO: (Cable Connections)

-check your cable connections

1. The Ethernet cable should be connected from your video phone to your Router's port 4.

2. The Ethernet cable should be connected from your computer to your Router's port 1.

3. The Ethernet cable should be connected from your modem to your router's WAN port.

What in the world I tried that but still doesn't work because it make the internet stop working help!! oh by the way i got a roadrunner and the ethernet cable label came off

Answer 1

1)  The incoming cable or line should be connected to the MODEM.  Make sure it is also plugged into electric.

2)  An ethernet cable should run from the MODEM to the ROUTER (back).

3)  Computers and other devices connect to the ROUTER front Ports.

4)  Run your wizards.  Control Panel > Network Wizard, and Wireless Network Wizard (only if you have wireless).

5)  If after all of that is done, you still don't have connectivity, check your NIC.

RIGHT click MyComputer > Properties >

tab Hardware > button Device Manager >

scroll down to your NIC Network Interface Card >

Right click and DISable the card < yes DISable

Restart your computer >

This should automatically load NIC drivers

Go back to NIC in Device Manager > RIGHT click, make sure it is ENabled.

PICTURES AND INSTRUCTIONS:

http://www.microsoft.com/windowsxp/using...

^j^

Answer 2

uhmmm *cough cough* huh