Hey everyone,
So I have a dell projector that I project from the back of a room onto a while. I noticed today that the picture was pretty crooked so I did some adjusting and got the top of the picture aligned and both of the sides straight (I used a yard stick). The bottom however is off by about an inch from one side to the other. Meaning the bottom corner off one side is an inch higher then the bottom corner on the other side.
I was using an all white screen, I know the walls/floor are not crooked, and the projector is on a flat surface. What settings could I adjust that would only affect the bottom, or do I need to readjust the entire thing.
Tags: