Dent In Corion Counter top?

Question

I was Doing A project with my little brother and used a kitchen knife. When I was done I found two knife marks cut into the counter top (yes I know I was stupid) PLEASE Tell me if there's any way I can fix it!!

Answer 1

Nicks, scratches and cuts are inevitable with any high-use product, including Corian. But because Corian is solid all the way through, it is easy to renew to its original appearance as described below.

Minor damage, including scratches, general or chemical stains, scorches or burns, and minor impact marks, can be repaired on-site with a light abrasive cleanser and a product such as a Scotch-Brite* pad. For heavier damage, light sanding may be necessary. The following steps should be followed:

Identify the extent of the damage and ascertain whether a minor repair will solve the problem. You may want to consult with your supplier of Corian.

If the damage is minor, try to repair it with an abrasive cleanser or a product such as a Scotch-Brite* pad.

If the above step is unsuccessful, hand-sand with 400-grit wet and dry paper. To minimize dust, wet the surface before starting.

If this is unsuccessful, use an electric sander and heavier-grit paper. Always make provisions to control dust.

If this, too, is unsuccessful, you may need to consult a professional for other repair options. In this case, contact your supplier of Corian for assistance.