Diagnostic code P0753?

Question

Okay 2000 Jimmy issue. I got the diagnostic scan done and it read code P0753 "shift silenoid A electrical". The vehicle isn't going into third and, as previously stated, running at higher rpm than normal. I checked the fluid for the trans. The biggest question I have is how much is this likely to cost me if the only thing wrong is the code that showed up? And what does this mean in laymen's terms?

Answer 1

Laymens terms = Transmission work

Could be a few hundred dollars depending where you take it.

P0753

P0758

The ECM checks for an open or short circuit in the shift solenoid

valves No. 1 and No. 2 circuit when it changes gear position.

The ECM records DTC P0753 or P0758 if condition (a) or (b) is

detected once, but it does not light up MIL.

After ECM detects condition (a) or (b) continuously 8 times or

more in one–trip, it causes the MIL to light up until condition (a)

or (b) disappears.

After that, if the ECM detects condition (a) or (b) once, it starts

lighting up MIL again.

(a) Solenoid resistance is 8 W or less (short circuit) when the

solenoid is energized.

(b) Solenoid resistance is 100 kW or more (open circuit) when

the solenoid is not energized.


Open or short in shift solenoid valve No. 1/No. 2 circuit.


Shift solenoid valve No. 1/No. 2


ECM

Fail safe function:

If either of the shift solenoid valve circuits develops an open or short, the ECM turns the other shift solenoid

ON and OFF to shift to the gear positions shown in the table above. The ECM also turns the shift solenoid

valve SL OFF at the same time. If both solenoids are malfunctioning, hydraulic control cannot be done electronically

so it must be done manually.

Answer 2

my answer is try to check it out first on auto repair shop in your area