Question:

Error code 0x00008086 ? ?

by  |  earlier

0 LIKES UnLike

i have a dell laptop and have blue screen with this error code , can anyone help me please , i cant get past the code to do anything HELP PLEASE ;O)

 Tags:

   Report

3 ANSWERS


  1. Hi Farmgirl

    not seen that error myself, but did a search and it seems quite common

    http://www.tomshardware.com/forum/82841-...

    One forum suggested it could be to do with 'hibrnation' mode - you could disable hibernation in the power saving setup

    Failing that - email our resident PC repairer


  2. Could be a problem with device drivers, hardware or software. This  problem can be solved by uninstalling new softwares, updating device drivers and making minor configuration changes . From http://fixit.in/bluescreenofdeath.html . You can also run a free registry scan using utilities from http://re7.info


  3. The Kprobe problem is the result of the drive being run in AHCI mode with the Intel driver (iaStor.sys) controlling the SATA controller. Running Kprobe with this setup causes a Windows XP STOP 0X00008086 error. This Intel driver is part of Intel Application Accelerator. I don't know if it is the AHCI mode, or the Intel driver causing the problem (or both), but I strongly suspect the Intel driver--the driver seems to think the 716SA is a hard drive. To solve this problem, go into the BIOS setup, and switch the SATA mode from AHCI to ATA, and then *reinstall* Windows XP and all of your drivers and software. In ATA mode, the SATA controller uses standard Microsoft drivers--which is probably why the drive works perfectly and doesn't crash when Kprobe or pxscan is run (to be used on a Liteon drive, but while the Plextor drive is hooked up).

    Or it is possible you have a problem in hard drive.

    Contact your Dell vendor.

Question Stats

Latest activity: earlier.
This question has 3 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.