FAULT WITH LIGHTS 306 DIESEL M REG

Question

COULD ANYBODY HELP FULL BEAM WORKS SIDE LIGHTS WORK BUT NOT NORMAL BEAM. CHANGED ARM OK CHECKED FUSES OK BUT NO POWER COMING THROUGH ON NORMAL LIGHTS OTHER LIGHTS AND POWER TO THEM ALL OK PLEASE HELP

Answer 1

You'll need to check from the low beam fuse on wards to the lights.You must have some kind of broken , frayed or corroded wire in the system and all you can really do is make sure that the grounds going to the head lites are solid and that the wiring is good.Basically the circuit should work like this.........power goes to a fuse then from fuse to the headlite high low switch then from there to the head lite switch.

Hope that helps and best of luck.By the way it all depends on the wiring design they used but the head lite switch itself could be faulty too.