Hello,I'm using a Janome 11706 (yes, the Hello Kitty one) and I can't figure out what's wrong. The needle thread keeps showing large loops on the bobbin thread side, and after a little bit of sewing, the machine stops feeding the fabric altogether before jamming and pulling the fabric down toward the shuttle. I can get about 2-3 inches in before this happens.I've adjusted the tension both directions, changed the needle, changed the bobbin, cleaned the feed dog and dismantled and cleaned the hook race. The issue shouldn't be the type of thread I'm using with the fabric, because I've sewn half my project without any problems. Any ideas?
Tags: