Ford 302 combo?//////?

Question

I want to know if this camshaft is a good for my combo.http://store.summitracing.com/partdetail.asp?part=CCA%2D31%2D226%2D3&autoview=sku I have a 302 bored to 306 cubic inches. Forged pistons about 10.1 compression ratio. Torker plus edelbrock intake (1500 and up RPM's) and Roush SR. heads 2.02 and 1.60 valves.

Answer 1

yes that will be fine  might i recommend 1.5 rockers to bring the torque curve down just a bit  

Answer 2

I have the same cam in my '66 Stang with a 289.  My engine has a 575cfm Demon double pumper,  Edlebrock Performer RPM intake,  AFR  165  aluminum heads,  full length headers, 10.5/1 forged pistons,  4 speed trans,, and 3.00 rear gears.  This cam makes awesome power when the revs are up(2500-6500).  The negatives are it makes terrible low rpm torque and idles rough.  With a little bit more cubic inches like a 306, the low rpm power will inprove just a bit.  I average 6-8mpg city(driving like an old man), and about 14mpg on the highway(65mph or lower).  This cam lowered my mpg's by about 3-4 mpg.

Answer 3

302's rule! my dad had one in a ford ranger with micky slicks on the back and a holly carb......FORD 4 LIFE!