Question:

Fuel Delivery?

by  |  earlier

0 LIKES UnLike

I have a 2000 Jeep Cherokee Sport 2wd 6 cylinder. I have had the crank shaft censor replaced, and I have replaced the fuel pump and filters. Fuel is getting to the bleader valve on the top of the motor, however not making it to the injectors, or the injectors are not injecting the fuel. Any ideas what this maybe?

 Tags:

   Report

3 ANSWERS


  1. There may be a fuse that supplies 12 volts to your injectors.Check to see if it ok. If you have a test light turn the ignition on and check for 12 volts to one side of the connector going to one of the fuel injectors or get access to a noid light that plugs into the injector connector and the light should flash on and off when cranking the engine over. Or you should hear the injectors making a clicking noise when opening and closing.


  2. Your fuel tank is clogged?

  3. if fuel is getting to the rail but not comming out the injectors means the computer is not pulsing the injectors.
You're reading: Fuel Delivery?

Question Stats

Latest activity: earlier.
This question has 3 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.