Having washing machine problems.?

Question

When i was using my washing machine, suddenly it stopped at "rinse" process. Can anyone let me know what was the problems? thanks ^^

Answer 1

make sure ur filter is not clogged

Answer 2

do you have a rinse hold button that has been pushed in by mistake  

Answer 3

few things...   Pump..Motor brushes,    programme timer .  have to get it checked out   . Presume power OK  Fuse not blown..  

Answer 4

Defective timer stopped at rinse cycle. Replace timer.

Answer 5

some times a sock gets stuck in the out let  

Answer 6

Maybe the belt broke

Answer 7

This maybe because you have put the machine on a synthetic wash cycle eg minimum iron, delicates etc. if this is the case many front loaders automatically do a "rinse hold" on these cycles. This is after the final rinse it holds the water and stops rather than moving onto the final spin, this is to help prevent creasing. You are meant to move it onto the spin and remove the clothes straight away after the spin is complete to prevent the crushing of the fabrics.

Some machines do this automatically some you need to select the rinse hold button. So either you have depressed the rinse hold button if you have one or you have selected a synthetic cycle.

Answer 8

It could have gotten out of level, raise your lid and grab the inside of the tub on both side's of it, then give it a really good shake . The reason i said to do this is the tub can get unlevel or tilted and by shaking it can line it back up.