Hello, how do you fit a screen door into its track outside the glass door? Thank you.?

Question

The screen off the track seems too long . How do you bend it to fit back onto the track?

Answer 1

There are spring loaded roller guides on one side of the screen door. Have someone help you align the edge with no rollers into the track, then use a flathead screwdriver to push the wheels up into the screen door a little (they should go up about a half an inch), and pop the screen into the frame. It will be a very tight fit, so it may take a minute to get it in. afterwords, get yourself a can of SuperLube Dri-Film spray, and spray down the whole track, then slide your door back and forth a few times.

Answer 2

I know these can be a pain in the rear. You put top half in first and then with a flat head s***w driver in hand you put the bottom in pushing up on the rollers. It is really a two man job. Makes it easier.  

Answer 3

There should be some kind of springs. Put the top of the screen in first ...push up and put the lower half in on the track. When you let go the screen should be in/

Answer 4

Not outside the glass . There is a roller on the bottom - it is spring loaded - get a flat screwdriver or a kichen knife and hold it up so you can move the door over the track it belongs on.