Help, bleeding front brakes on my Honda TRX 200 SX?

Question

Unable to get all of the air out of the system.

Answer 1

open the bleed s***w .. ( take it out even )  

pour brake fluid into the master cylinder..

when the fluid comes out of the bleed s***w hole .. s***w in the bleed s***w.

top up the master cylinder

..you may need to..

   pump the brake till you have pressure..

bleed the air out..

Answer 2

These help:

http://www.harborfreight.com/cpi/ctaf/di...

http://www.harborfreight.com/cpi/ctaf/di...

http://www.harborfreight.com/cpi/ctaf/di...

Answer 3

You can either buy the tool that lets one person bleed brakes on there own or if you have a small container and a piece of hose that will fit over the nipple and a spanner to fit and someone to help. All you need to do is push the hose onto the nipple pour some new brake fluid into the container and as you undo the nipple your helper squeezes the brake lever in. Now before they release the lever you must do up the nipple and then keep repeating this until all the air is gone.

The reason for new fluid in the container is if one of you make a mistake you won't suck up more air just fluid.

Also don't forget to keep putting more fluid in the reservoir as this simple mistake will allow more air in.

Hope this helps