Hi everyone, my toilet is completely bloked after using it last night, now all the shifts floating ..help?

Question

now it's so smelly, the floor was dirty, the toilet was full of the dirty tissue and ****.....what should I do?Thanks soooooooooooo much

Answer 1

Everyone has had this delima. I've gotten in the habit of watching and making sure it's going down before I close the lid sounds nasty but it beats the alternative. Don't keep brick-a-brack on top of the tank lid or at least very few items that can be quickly and easily removed. The reason is, if you notice the water risen you can take off the lid set it down flat, you don't want to break it, and pull up the float. Giving Mr. Toilet the illusion his tank is full, this will stop the water rising in the bowl. Sometimes you have to hold it up for awhile till the level in the c**p receptacle goes down enough to where you feel comfortable to let it go. Process might have to be done a couple of times but as mentioned before it beats the alternative. Now that the level is at an acceptable level it's fingers crossed and plunger time. Purchasing a plunger. I've found the ones that look like an Oboe that's been crinkled up in an accident with a cone on the end to be the best. Your friendly Ace Hardware man will know. The toilet snake is the next to last resort, meaning the plumber would be next but that's unlikely. Toilets are like some people every once in awhile your gonna get ssshhh on. Another nasty note if you know it's a knarely one, flush in between before stuffing it with paper, and hopefully feminine you knows it aren't being flushed down. If youve ever owned a cat you know what pooper scoopins like.

Answer 2

the only thing u can do is put on a pair of marigoulds. and remove the tissue by hand. then if its still blocked get a plunger dont plunge with it still full of tissue as it will just flood more then just put some vinegar and bicarb down the loo  to clean the p**p up and get scrubbing.  to clean the floor use a mop

Answer 3

Get that plunger out and start plunging.

Answer 4

Plunger!  If you don't have one, go get one.  Get the one that is called a "bell" plunger.  It looks like a regular plunger with an extra rubber piece on it that helps the plunger work bettter.  If that doesn't work, you may have to get a sewer snake or tape, which is a long piece of flexible steel that you shove down into the toilet drain and shove it through until the blockage moves on.  Its going to be messy until you get it opened up.  Make sure that disinfect the whole bathroom with bleach to kill any nasty germs that could make you and your family sick.

Answer 5

use a plunger and pour some bleach water down it and then scrub the whole bathroom in bleach water remember to open windows and get some air flowing in there so you won't kill over from the bleach smell good luck hope it helps you out if it don't work you may need to call a plumber

Answer 6

plunger