How 2 make a easy bomb

Question

how can i make an easy eectronic bomb without gunpowder or flashpowder

Answer 1

umm are you a high school killer or something why do you need a bomb? thats highly illegal

Answer 2

THE EXPLOSIVE MATERIAL:

-match heads or gunpowder can be used though they burn rather slowly.

-Permanganate with sugar half and half

-or similarly, Chlorate with sugar

(easily available materials with the chlorate having a higher explosive effect than the permanganate.)

-Aluminium is a potent fuel and when combined with Carbon Tetrachloride or Permanganate

(These are all of the lesser explosives which however are easier to acquire. They are usually ground fine to accelerate their burning rate.)

THE FUSE:

Military detonation cord is best to use as a fuse otherwise cannon or fireworks fuses can be used instead. It is important to know where to place the fuse in the assembled pipe which is discussed later in the assembly section. ELECTRICAL DETONATION CAN ALSO BE FACILITATED.

ASSEMBLY:

This consists of a pipe body threaded at both ends and capped on both ends with steel or brass caps containing the filler. For additional resistance, a metal strip can be wrapped from one end cap to another so as to prevent the caps from flying off the pipe during the explosion. It is highly advised that an inner soft lining of plastic is used in the pipe to prevent any possible accidents with friction as when the pipe bomb is moved from place to place. The fuse is best placed through a tiny hole drilled on one end through a cap when both sides of the pipe are closed. However if high explosves are used as filler one end is usually left open with the fuse placed in the open end, if the fuse is placed erroneously in the capped end in this case the explosive material will be blasted out of the pipe prematurely. A thick metal pipe would create better fragmentation destruction than a thinly walled one. During the assembly process the important fact to consider is that explosive filler is usually sensitive to friction, so it is important to fill the pipe carefully and avoid having powder between the s***w cap and s***w threads as the friction could set them off.

Answer 3

Contact the folks at BATFE, and they can help you.