How can I eliminate the ESA module on my Cobra to shift like a merc.?

Question

I've had a OMC mech. replace the cable and replace the kill switch for shifting and it still kills the engine when I shift into reverse. You can't count on anyone to do anything except charge high prices.I probably know as much as he does and I know nothing .

Answer 1

i don't think your shift cable is adjusted properly. if it kills in reverse and not in forward. the shift module is made to shut motor down momentarily for easy shifting.  

Answer 2

First let me tell you,this is the worst system I have ever seen or worked on in my 35 years working on boats.The ESA system only shuts down 2 cylinders when shifting,so if you do not have it set-up properly it will stall every time.The merc. system momentarily shuts off

the whole ignition system witch in my opinion works much better.I just

finished doing what you are asking and it works great.To do it you must disconnect the wiring plug to the module.Unplug the wiring to the

main cut-out switch.Now to wire it like a merc you need to connect 1

wire from the switch to a ground and the other wire needs to be connected to to negative side of the coil.That's it your done.Now you only need to start  it up and test it.With the engine running activate the

switch and it should shut your motor off.The only other thing to do is to

be sure that it is properly adjusted so that after you shift the switch is

not stuck on.I hope this helps and good luck.