How can I wall-mount this mirror (See pic)?

Question

http://www.amazon.com/Packaged-Mirror-Round-1-pc/dp/B0018N93D8/ref=sr_1_27?ie=UTF8&s=furniture&qid=1213376556&sr=1-27

I want to wall mount several of these round mirrors without framing them.How do I do it so it stays strong and doesnt fall off one day?

Answer 1

well there small and can't weigh that much so in the painting section where the caulking is look for the product called Liquid Nail, it will work just fine

Answer 2

You can use those sticky back picture hangers. Glue them to the mirror and then put a nail or s***w into the wall. This will not make them as flush as liquid nails but they will be a lot easier to remove.

They also make these clips that attach to the edge of unframed pictures and allow them to be hung by wire to a nail.

Answer 3

Liquid nails or adhesive caulk.   This will keep them flat against the wall. Just be warned that when you decide that you want to remove them, it will take the sheetrock with it.

Answer 4

Liquid Nail will work just fine.  The mirrors are small and appear to not weigh that much.  I would suggest getting the type of Liquid Nail for heavy duty projects or construction adhesive.  They both are made by Liquid Nail and can be found close in the paint section of your local hardware store.  When you attach them, don't use just one big dallop.  Use several small dallops around the edge of the mirror and in the center.  When you put them on the wall, chances are they're gonna want to slide down the wall.  Once you stick them up, use some painters tape to hold the mirrors in place until the glue sets up.  Painters tape will adhere to the wall but won't pull your paint off like duct tape will.  Good luck!