Question:

How do I adjust the FPS on a Tippmann 98 custom?

by Guest31919  |  earlier

0 LIKES UnLike

Okay, I have a Tippmann 98 Custom and I was wondering, how do I adjust the FPS on it? The velocity s***w is at a 45 degree angle under the barrel (I think, I may have to get clarification on where it is if I'm wrong) and I have the tools, but do I turn the s***w towards the gun to increase the velocity or decrease it?

 Tags:

   Report

2 ANSWERS


  1. There is a velocity adjuster on the left side of the body, just below and to the right of the "N" in "TIPPMANN." You can see a picture of it being adjusted in the source article link.

    In order to adjust the velocity you need to be in a place where it is safe and legal to fire your marker (paintball field, with all bystanders protected by netting or paintball goggles.) You will need a chronograph and a 3/16-inch hex wrench.

    The adjuster is a s***w that blocks the gas flow from the valve to the bolt. If you s***w it in (clockwise) it blocks more of the gas, so your velocity goes down. If you s***w it out (anti-clockwise) it blocks less gas, so the velocity goes up.

    Just take a shot over the chronograph to check your velocity, adjust and check again until you get it where you want it. Most paintball fields limit velocity to 285 feet per second. Never go above 300 feet per second, as velocities above that are unsafe (beyond paintball goggle ratings and can cause damage and infection on skin due to the heavy impact.)

    It is important to test and adjust the velocity before each day of play, and even multiple times during the day as weather changes, because it is affected by temperature.


  2. Its on the side of the gun, its the bigger allen key you get with your gun, turn it in the turn velocity down and turn out to turn it up.

Question Stats

Latest activity: earlier.
This question has 2 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.