How do I connect my amplifier and subwoofer in my home teather in my house?

Question

I want to listen my car subwoofer in my house with the car amplifier connected to the audio from the home teather I want to get the bass only should I connected to the bass cable only or to the RCA output .? but there is another problem the blue cable is the remote cable where do I connect this cable and what do I need for the power for the amplifier I mean what and how many volts?

Answer 1

plug it into a PC PSU

Answer 2

Car audio and home audio are different, hard  to make work well, usually differing ohms. You well need a crossover. lol

Answer 3

You haven't told us if your receiver has a sub-woofer output to hook up to. If so,connect it to the input of an audio level control box and then to the amps line level input. You can eliminate the level control box if your amp has input level adjustment controls.

The Blue control line is used to turn the amp On-Off.I suggest you connect the blue wire to one side of a normally open toggle switch and the connect a piece of wire from the other switch post to the +12v of your power supply.

Turn everything On and enjoy!!!

Answer 4

buy a home system. this setup will not work. your car amp is set for twelve volts not the 120v coming out of your houses electrical. you will damage your system doing this.