How do I program my RCA rcr311st remote?

Question

I have the codes but I need the steps to getting it programmed. What is the process to get it programmed?

Answer 1

1. Manually turn on the component you want the remote to control.

2. Press and hold the component key (TV, VCR•DVD, SAT•CBL) you

wishto program. The illuminated ON•OFF key turns on and

remains on. If you release the component key at any time

during the Direct Code Entry procedure, the illuminated

ON•OFF key blinks four times,and the process is exited.

3. While holding down the component key, find the four-digit code that corresponds to your component’s brand and use the number keys (0-9) on the keypad to enter it. While you are pressing the numbers, the illuminated ON•OFF key turns off.

4. After the fourth number is entered, the illuminated ON•OFF

key turns on. At this time, release the component key. If the

illuminated ON•OFF key turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry.

If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the illuminated ON•OFF key blinks four times when the component key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 2.