How do I remove the door panel in a 1997 Honda CR-V?

Question

My window in my CR-V on the driver's side does not work anymore so I tried to take out the inside door panel to see whats wrong. I can't remove the panel even though all the screws are undone because the lock switch/door latch area is still attached to the main part of the door. How do I completely remove the inside of the door to repair my window?

Answer 1

most lift up somewhat off the bottom and they hang by a lip on top sometimes thats what holding you up.. most are held in place by pop buttons a round the edges of panel few few inches just prying it out some works most of the time after you have found the first one dont think its the switches holding you up they shoul dcome out with the panel enough you can undo the plug holding them in... bet its the pop buttons that hold the panel to the door slide a blade in between th e panel and door you will find them

Answer 2

pick me as best answer b/c i kno u in real life!!

Answer 3

If you pull out on the door handle and look righr behind it you should see a s***w that you need to remove,Now that you have that s***w and all of the other one's out allyou need to do is take s***w drive or a flat bar and start at the bottom of the door panel by sticking it between the panel and door ,then just pull up on it ,the panel should start popping aloose .It's not hard at all to do .just take your time and  you can do it.