How do i fix my b b gun?

Question

it wont fire

Answer 1

need lots more info. what kind of gun, what does it do. what does it not do. (besides not shoot, i mean)

Answer 2

ask your mom.

Answer 3

ok not a lot of info to go from so we will start basic

The 12 Golden rules for Safe Gun Handling

1 Always treat the gun as loaded.

2 Always keep the gun pointed in a safe direction.

3 Always keep your finger straight and off the trigger until you are ready to shoot.

4Always keep the gun unloaded until you are ready to use it.

5 Never point the gun at anything you don't intend to destroy.

6 Be sure of your target and what is beyond it.

7 Learn the mechanical and handling characteristics of the gun you are using.

8 Always use proper Ammunition.

9 Be sure the barrel is clear of obstructions before loading and shooting.

10 If your gun fails to fire when the trigger is pulled, hold your shooting position for several seconds; then with the muzzle pointed in a safe direction, carefully unload the gun.

11 Don't rely on the gun's safety to keep it from firing.

12 Be aware of your surroundings when handling guns so you don't trip or lose your balance and accidentally point and/or fire the gun at anyone or anything.

that being said

check your safety is it on

if it is a pump did you pump it

if it is co2 is it out of co2

the best I can do with no information on what is happening and what type of BB gun

Answer 4

It would help if you had a little more detail, maybe a picture, how you've abused it in the past, how much it cost, brand, mechanism type...etc...

Answer 5

Take a hard toothed saw, and saw of the butt stock, then take a rectangular piece of wood and nail it onto the gun right in front of the trigger guard, take a hacksaw and saw off half of the barrel, weld a steel rod in the barrel. Now it looks like a real gun!!!!



Sorry if it sounds like I'm being sarcastic, but this is the safest

answer I could give. -EDIT- Whats with the thumbs down? I'm

not a liberal freak, what I meant was if he/she is stupid enough

to break it and ask a dumb question like that, than he/she is

probably stupid enough to shoot his/her self. I suppose what

I should have said was: read the instruction book and it will tell  you where to send it to get it fixed.