How do i get my dsl modem properties?

Question

like the ip address, subnet mask, preferred dns, default gateway, and alternate addresses. or basically the info and addresses needed to configure your lan connection (on a pc windows sp2) so as to connect to the internet? in internet protocol (tcp ip) properties of network connections.

Answer 1

If you modem is a modem/router and DHCP is enabled on it, you should be able to set up your ethernet to get everything automatically.  But if your modem is a bridge modem, or in bridge mode, you may need to run PPPoE on your computer (if you do not have a router to do that).

If your modem is doing PPPoE and you want to find out your public IP, do Start, Accessories, Command Prompt, and then type: ipconfig /all.  Look for default gateway and enter that as a URL in your browser to log into the modem.

It would help if you said what make/model DSL modem or whether you have a separate router.

Answer 2

If u ar lookign to connect to your modem and view / edit ites config , some of the answers are correct . Avoid disclonig the make of the modem on the public forums for your PC / home network security from internet net vulneability

Answer 3

got to your internet explorer

type : the IP Addresses and check in the following order

http://192.168.1.1

http://192.168.1.2

http://192.168.1.0

One of them will point to your modem, ideally the default user name and password that will be prompted for will be

user name : admin

password : password  or admin

enjoy