How do i get the door panel off of a Mercedes benz 300e?

Question

I own a Benz 1989 300e and the driver side and rear passenger window on the right are stuck open! I cant seem to figure why though. i started switching switches around to see if i can manage to get them working but nothing. the two windows are stuck open. the switches don't work at all! I am going to buy a new switch online and see if that changes anything but in the mean time i have to get these windows up. this leave for one option. the door panel must come off. any help would be much appreciated.

Answer 1

Have you checked your fuses? on the older benzes usually power is supplied through the same fuse to diagonal windows.  

Answer 2

It shouldn't be very much different than this! Follow the link to a pictorial that will show you exactly how to do it. However, this is for a different model Mercedes but it should be the same concept. Hope this helps!

http://dieselgiant.com/mercedesmastervac...

Answer 3

Twist off the door lock caps, unscrew any screws that u see some might be under the door where there is a light. Then u pull up hard on the panel. You really have to jerk some of these they can be a pain.

Answer 4

The guys where I work use a thin wedge, you slide it in at the edge of the door panels and gently pop the clips loose. There are probably 6-8 clips that hold the panel onto the door.

Answer 5

I hope you listened to Donald A coz it,s a fuse!!!!