How do i level my pool table?

Question

How do i level my pool table?

Answer 1

Have you checked under the legs of the table...there should be some levelers that you can adjust.

Something like these...

http://www.artisanbilliardsmfg.com/image...

You'll need a bubble-leveler of some kind from your local hardware store.  Generally a 2.5 ft level works best for the job.

Also, Billiard slate backing is an important part of leveling the table. When a table is installed the tightness of the slate screws will affect the leveling.  The wood backing provides some give, so that by tightening the screws one at a time and inserting wooden shims underneath the backing, you can level the playing surface more accurately than in a table with unbacked slate.

http://www.pooltablesandbilliardsgames.c...

or,

How to level a Pool Table:

http://www.ehow.com/how_2627_level-pool-...

Answer 2

You can sometimes put shims under the legs to level one.

If it is a cheap one though, the tabletop might be warped.

Answer 3

Better listen to Gene on this one

Shims?? Must be 100 tear old table

Answer 4

Place it upside down! ha!ha!  You didn't say you were gonna use it to play.

Answer 5

Ride with Gene here but use an engineer level instead if one is available. This type of level gives a omniposition look with only the one level.

Answer 6

Put two levelers on top, perpendicular to each other. put shims underneath to level it. If you can't get them both level, your table is probably warped.