How do i oil my airsoft gun?

Question

where do i put the oil

Answer 1

Well you don't sound like the type that would open up your gearbox and clean it out and re lube so just just your loading rod that came with the gun (hopefully you still have it) and on the end with the hole stick a piece on cotton in there (which is probably less than 1/10th the size of the cotton ball) and spray silicone oil on the cotton push it down you barrel, not too deep, don't want to mess up your hopup rubber p.s. make sure your hopup is off. and then just clean it out. Last step spray some in your magazine well and load a magazine and fire a few shots, that way the bb can clean out anything you missed. But if you are talking about a GBB... sorry I wasted your time =P that guide was for a aeg.

Answer 2

there should be a lock somewhere in the gun, find it and take the top part off and add oil

Answer 3

go to your local gun shop or what ever and buy some action grease or oil $5.00-$8.00 get one of those bottle scrubbers and wrap it with a cloth simular to a t shirt and .....well I'm sure you can figure the rest out

thats how I do it.

Answer 4

Only use silicon oil.  

Answer 5

i think 13 and order

Answer 6

Which gun do you have?

Answer 7

use wd40 .....

oj that will destroy it use silicon oil you can buy in any gun r tacle shop or by it online then just spray in every possible hole of the gun