How do i program my Dish Controller to my TV1?

Question

I have a TV1 and TV2 from the same box. how do i program my new control to work on TV1?

Answer 1

Here you have the link for the remotes dish has, just click on the one that you have and there you will find the codes for all the tvs!!! Good Luck

Answer 2

There's two things that you can do:

The first one, if you look towards the back of your user's guide for your receiver and find your TV manufacturer's codes, once you find the company who made your tv, take your remote and push and hold the clear tv button (not the red one) until all 4 buttons (sat, tv, vcr and aux) light up. Once they light up, enter the codes for your TV. After entering the three digits, push the pound or "search" button (bottom right of the remote) twice. The TV button will blink three times to confirm that it was entered correctly.

The other way to do it:

Push and hold the clear TV button just like before until all the four lights blink, then push the TV Power button (the red button). After you do that, push on the blue "up" directional arrow button. Keep pushing this button, waiting a second or two between each press until your TV turns off.  Once it turns off, push the "Search" (pound symbol) button twice. You should see the three blinks like before and if everything was done correctly, the remote will work with the TV. If not, try the other codes or you may have pushed the directional "up" button too many times after it turned off and you'll just have to start over.

The Dish remote does not support all TVs, so if you still can't get it to work, that could be the problem. If your TVs are Sonys, a Universal code for them is "500".

Answer 3

you will have to give more info for people to help you, first what kind of remote control, second tv types. Thanks let's see if we can get it working for you