Question:

How do i remove a gyro???? B^MX?

by Guest33214  |  earlier

0 LIKES UnLike

i ride bmx and im trying to remove everything that i dnt want on my bike before i give it the ultimate paint job! (lol)...bt im stuch at removing my gyro! i used the hacksaw to get the bottom part off which was welded to my frame and now im trying to figure out how i get the top parts off....HELP meh please! YOU KNOW YOU WANT 10 POINTS....=P

 Tags:

   Report

5 ANSWERS


  1. ok take off the handle bars  then take of the gyro it should just pull off it shouldnt be attached to anything but the brake cables and then you put the handle bars back on


  2. not like that!. why would you cut something off if you were gonna put it back together???

  3. Hi, It isent called a ''gyro''  gyro is model of the Oddysey kind of detangler. people use gyro often tho, but it isent the real name unless you got an oddysey gyro.

    anyways it's called a detangler.

    Now listen carefully, do it all step by step.

    - take off all your brakes/brake cable/ and everyting like that...

    - Un s***w the s***w on the stem. (the big s***w that aim's up.

    - Un s***w the little ting ON the stem, it's on the side of the stem.

    -Take off the stem!

    - take off the gyro top part

    - take off the spacers.

    - take off the gyro bottom part.

    - put some EXTRA SPACER'S because you need to balance the loss of space that the detangler made.. so befor removing the detangler, buy or make some spacer's, you will need about 2-3spacer's depending on the size of them, if you do not put new spacer's the handlebar/fork will shake causing frame damage and you will need to buy a hole new frame or bike.

    - after putting spacer's put back the stem

    - then tight the s***w's/bolt's of latrer on and ur done!

    i highly recomend simply going to a bike shop to do this, because you dont know how to do it and your not skillfull (NO OFFENCE BUT YOUR ASKING THE QUESTION ON YAHOO...)

    but if u really wanna do it do my step's. if you would like to do it at the same time as talkin to me (i,e. asking me question's at the same time as you do it) here is my MSN : tripo_kitty141@hotmail.com   add me it will be my plaisur to help you step by step. and awsnering your question's/

    ___________________________________

    Update.

    YOUR SCREWED. why did u take off bottom part, u dint have to... haha it's gonna cost u more then the bike costed just to re-weld the bottom part..

    well have fun with ur broken bike now, its trash now.

    sorry for u

  4. your completely screwed. if your fork was welded to your frame, you couldnt turn. take the nadlebars and fork completely off, then the gyro will slip out

    are you sure your talking about a gyro?

  5.   What O Earth Is A Gyro?  

    I Think I know a bit about bikes ! but this one is a stumper

    Where onthe  frame is this part / better still Google this  problem. then let me know the answer later

Question Stats

Latest activity: earlier.
This question has 5 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.