How do i replace a genie intellicode remote battery?

Question

How do i replace a genie intellicode remote battery?

Answer 1

Remove the s***w, slide open the cover, replace battery....

You may have sync the code generators inside afterwards...

Answer 2

The bottom of the front slides down.  Replace with a 9V battery.

Answer 3

If its a lighter grey colored intellicode remote: There should be a small slot on the side of the remote. Use a coin such as a dime or a penny, stick it in the slot and twist. The remote should split in half and you'll see the coin-shaped battery. After you replace the battery, you can snap the 2 pieces of the remote back together.

If its a dark grey/black intellicode remote: The back cover should partially flip open to reveal the battery. This remote takes a 12volt N-size battery.

If its a keypad remote you are referring to: The bottom half of the keypad's face should slide straight down to reveal the battery (you should see and arrow and some thumb grips). All Genie keypads take 9volt batteries.