How do i start my car engine when my remote starter does not work. ?

Question

When i put my key in the ignition , the lights are fine meaning battery is okay, so how can i disable the starter. My car is a manual transmission.

Answer 1

Ok, so i am guessing you had a remote starter installed on your car which has a manual transmission, and now if you try to start your car with the key it doesn't start, it only starts with the remote?

if that is the case, then whoever installed your remote starter, did not bypass the safety switch on the clutch pedal correctly..in most manual cars, for safety, the clutch has to be engaged for the car to start and so there is a safety switch that is engaged when the clutch pedal is pushed in for the car to start...with a remote starter, that switch must be bypassed  for the car to start with a remote...but i am guessing that whoever installed it, didn't bypass it properly, and now your car wont start with the key, because when you push your clutch pedal, there is nothing there to sense that!! take it back to the shop or a different one, so the safety switch can be bypassed properly.

Answer 2

i dont understand do you want to start it or disable it? make sure the connections to the starter are clean my friend had his car down for two weeks cause he replaced his starter and solinoid and it still wouldnt start. so he finaly calls me up and i go check it out and turns out to be a loose connection really simple fix his lights were still comin on nice and bright but it wouldnt do anything. as for the remote start it really dont have anything to do with anything it just bypasses the original wireing. you should be able to start it with the key.

Answer 3

huh?

Answer 4

key in the ignition . and it wont start does it just click or dont do anything .. first thing to do is clean the battery cables.. you cant go on if the light work or not.. light dont pull as much power has a starter... have you tried to jump start it with another car