How do i wire an electric start to a 11 horse motor?(go-kart)

Question

i have leads coming of the block that leads to a little box that has another lead going from it i also have another lead coming off the distribution block thats generates the power for the spark so i know its electric i just dont know what to wire where

Answer 1

Contact teck support for the brand of the engine you have> Have the ID & serial # when calling>

Answer 2

there is most likely a killswitch which is what 2 of those wires are for. i dont know exactly how many leads you have but there should be at least 4. if it is indeed an electric start you should see a small cylinder off to the side of the engine by the flywheel probably about half the size of a coke can. there should be 2-3 leads coming off of this. one will be grounded to the motor or chassis usually a tad smaller than the other 2 and then the other two are wired in series with a battery and an autodisengaging switch (like a push button). the other 2 wires being the kill wires will be wired to part of the ignition system on the engine an should be wired in series with a on/off toggle or similar switch.