How do you build a wrestling ring?

Question

We have a website where you can watch our shows every week http://www.hcwbyw.co.nr/ but we want to build a ring, how do you build one?

Answer 1

"They put there bodies,there careers, and there lives on the line, They have spent years training and have a life-time of experience, but what entertains you tears there bodies apart, so cheer for them, admire them, belive in them, but leave the action to them,please do not try this at home"

i use a trampoline

Answer 2

well if u have a trampoling,u can get some poles or what jeff and matt did and cut down a few trees,and then get like water-hoses,or cables or something and set it up that way on the trampoline!!!!

i'm wanting to do that with my trampoline

Answer 3

the best way to build a wrestling ring is to take 4 8 ft 2x4s and s***w them to 4 12 ft 2x4s. that would make a 12x12 ft frame then take 6 12ft 2x4s and s***w them to 2 of the sides of the 12 ft frame (should go vertical ways) then take 7/16'' flat plywood and s***w them to the whole thing of the 12 ft frame. then when u can get to stand on the inside, drill 3 wholes into the 4 12 ft 2x4s with a drill (don't drill them too close) then put 3 eyebolts into the 3 wholes on each side of the 2x4s then get a total of 136' of normal rope and cut them into 3 pieces that should be at least 30' each then put them through the eyebolts and tighten them tight and tight them at the end. and for padding take some floor carpeting and put it on. i hope i helped.

Answer 4

the hardys just had a trampoline with some logs for turnbuckles and hoses as ropes.

Answer 5

Very Carefully =)

Answer 6

the 1st guy got it

i hope the websites free cause please tell me  the link that u made the website on