How do you change power steering hoses on 2001 hyundai xg300

Question

How do you change power steering hoses on 2001 hyundai xg300

Answer 1

look in the manual.

Answer 2

If it is the pressure p/s hose you are in for tons of fun. first, remove the upper and lower air box and the air inlet hose from the intake. look rown tward the rack and you shoul see two lines going in where the steering shaft attaches to the rack. the will be a 17mm nut. both need to be removed to get the hose out. then on the passenger side of the engine and follow the hose down twards the sub frame. there will be a 10mm bolt that holds the line in place. remove that as well. the you will need to get under the vehicle to remove the line from the pump. if you look at the bottom of the pump you will see a 24mm banjo bolt the screws into the pump which has a 24mm nut on it. you will need to hold the nut still while breaking the banjo loose. then remove the line. install in reverse order and bleed the p/s system.