Question:

How do you do an oil change on a 2003 Dodge Ram 1500 5.7 L V8 HEMI?

by  |  earlier

0 LIKES UnLike

How do you do an oil change on a 2003 Dodge Ram 1500 5.7 L V8 HEMI?

 Tags:

   Report

5 ANSWERS


  1. buy your oil filter and the correct amount and type of oil get a drain pan remove the oil filter with an oil filter wrench put on the new filter move the pan under the drain plug on the bottom of the engine take out the plug let the oil drain put the plug back tighten but not too tight add the oil and start the engine check for leaks shut it down and check the oil level the auto parts store will take the old oil


  2. Just find the drain plug on your oil pan, twist it counter-clockwise, and let the oil drain out into a suitable receptacle. Put the drain plug back in and tighten. Find your oil filter. Twist it off counter-clockwise. Wipe everything clean with paper towels.Make sure the old filter gasket ring came off with the filter. Put a little motor oil on your finger and lubricate the new filter gasket. s***w it on and hand tighten. Fill your engine with new oil. Warm up engine, then check for leaks.

    NOW, GO GET A COLD ONE !!

  3. remove the oil cap on top.     remove the drain plug underneath.  unscrew oil filter.

    Let oil drain.

    Replace drain plug.  put on new filter.   Fill with oil from the top.

    Put oil cap back on

    Your done.

  4. you do it like any other car/truck, just go under look for the bolt to unscrew that is holding the oil, empty it, remove the filter, put the bolt back on , put the new filter in and you are ready to insert your new oil!!

  5. if your asking, id take it to a drive threw oil change, like fast lube or something , thats what i do, a lot quicker and not that much more.

    way easier

Question Stats

Latest activity: earlier.
This question has 5 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.