Question:

How hard would it be to convert a mid-size refrigerator into a kegerator?

by  |  earlier

0 LIKES UnLike

First of all, I'm not sure how to do it. But if I were to do it, how hard would it be. Any plans on the internet?

 Tags:

   Report

4 ANSWERS


  1. Couldn't be too difficult.  I can imagine that the most difficult part would be installing the tap through the fridge.


  2. pretty easy, firstly you need a fridge that can hold the weight of a keg and that a keg will fit inside.

    strip all the shelves etc out of the fridge

    then you need to buy a tap and some food grade hose, a coupling for the top of the keg and a coupling for the top of the gas bottle which you can buy or hire and swap when empty drill  two in side of fridge secure tap and hose then connect to coupling on the inside then connect separate hose to other outlet on coupling then run it back out the other hole and connection on gas bottle connect keg turn fridge on pour and you will need to adjust the gas so it pours correctly

    kits for this can be found on net ebay etc

  3. you need a keggar that can  remain cold i am afraid that a  fridge  is  not cold  enough. i  use  a barrel  and  put  20 lbs of ice in it and  put  the  half in it (half barrel or quarter)

  4. i have ssen this question beforwe so i know

    http://www.realbeer.com/edu/kegerator/

Question Stats

Latest activity: earlier.
This question has 4 answers.

BECOME A GUIDE

Share your knowledge and help people by answering questions.