How i shutdown snother system on lan?

Question

How i shutdown snother system on lan?

Answer 1

Use the Shutdown command in Start->Run or a DOS command line by Start->Run cmd. Here is how to use Shutdown:

Shutdown

Allows you to shut down or restart a local or remote computer. Used without parameters, shutdown will logoff the current user.

Syntax

shutdown [{-l|-s|-r|-a}] [-f] [-m [\\ComputerName]] [-t xx] [-c "message"] [-d[u][p]:xx:yy]

Parameters

-l

Logs off the current user, this is also the defualt. -m ComputerName takes precedence.

-s

Shuts down the local computer.

-r

Reboots after shutdown.

-a

Aborts shutdown. Ignores other parameters, except -l and ComputerName. You can only use -a during the time-out period.

-f

Forces running applications to close.

-m [\\ComputerName]

Specifies the computer that you want to shut down.

-t xx

Sets the timer for system shutdown in xx seconds. The default is 20 seconds.

-c "message"

Specifies a message to be displayed in the Message area of the System Shutdown window. You can use a maximum of 127 characters. You must enclose the message in quotation marks.

-d [u][p]:xx:yy

Lists the reason code for the shutdown. The following table lists the different values. Value Description

u Indicates a user code.

p Indicates a planned shutdown code.

xx Specifies the major reason code (0-255).

yy Specifies the minor reason code (0-65536).

/?

Displays help at the command prompt.

Remarks

If you indicate a major and minor reason code, you must first define these reason codes on each computer for which you plan to use the particular reason. If the reason codes are not defined on the target computer, Event Viewer cannot log the correct reason text.

Examples

To shut down \\MyServer in 60 seconds, force running applications to close, restart the computer after shutdown, indicate a user code, indicate that the shutdown is planned, log major reason code 125, and log minor reason code 1, type:

shutdown -r -f -m \\MyServer -t 60 -d up:125:1

Answer 2

IT Technology

at

http://megalecher.net/

Answer 3

You can use Advanced IP Scanner v.1.5. Search your ip, select your ip, click on right button, go to Remote shutdown, fill every things with log in name and password. You must enable the "walk on Lan" from the Bios.