How long would it take to change the impeller on 92 seadoo?

Question

How long would it take to change the impeller on 92 seadoo?

Answer 1

It shouldn't take more than about an hour...the trick is getting the housing off and making sure everything is well greased with white lithium grease before you re-assemble the housing.

Answer 2

Hmm, someone giving you trouble with a labor fee?? LOL!  I would say it should take about an hour.  Take the steering cable off the pump nozzle, there will be four bolts holding the pump to the back of the boat, then you pull the cone off, stick it in a vice and using the spline tool you can remove the impeller.  The wear ring may need to be changed, you have to cut it in 2 places and then sorta pry and punch it out being careful not to damage below the wear ring.  Once it's out you can hammer a new one in and retighten the impeller in the vice.  Should take an hour, maybe little over depending on condition of your boat, etc, etc...  Hope it helps.  Sea Doo SP????  X??

Answer 3

less than 30 minutes.